Introduction

• The PCIe FPC Cable is perfectly compatible with Raspberry Pi 5, support all kinds of PCIe to M.2 Key-M NVMe SSD adapters.

• Length: 30mm; Pin number: 16 pin; Pitch: 0.5mm.

• There are letters “RPi5” and “HAT” printed on the cable to help you install it properly.

• The each end of the cable is reinforced with a stiffener to make insertion easier.

• Compatible adapters: ZP512, ZP513, ZP515, ZP516, ZP517A, ZP517B, ZP581, ZP582, ZP590A, ZP590B, ZP592, ZP593, ZP595.

Installation Guide

Note: please pay attention to the direction of the cable when installing it.

Install the cable according to the following pictures:

“RPi5” connects to Raspberry Pi 5, and “HAT” connects to HAT or expansion board.

Packing List

2 x 30mm FPC Cable

Support

If you have any question or need technical support, please contact: support@zde.plus.